某塑制厂总配电所及配电系统总体设计

电气工程论文编号:DQ103   论文字数:10014,页数:33

目 录
摘要……………………………………………………………………………. . .……………I
 1.绪论…………………………………………………………………………………………..1

1.1   毕业设计的背景及其意义……………………………………………………..1

1.1.1  电能及电力系统综述…………………………………………………………..1
 2.设计原始资料………………………………………………………………………………3
2.1  车间组成及布置………………………………………………….…………………..3
2.2  设计资料………………………………………………………….... . ………………3
2.3  设计范围、内容及其步骤….... . ……………………………………………………4
3.负荷计算………………………………………………………………….……….7  

3.1   负荷计算的意义……………………………………………………………………....7         

3.2   参数的计算…………………………………………………………………………...7
   3.3  无功功率补偿计算…………………………………………………………………….9
 4.变电所主变压器和主接线方案的选择………………………………………….12
4.1   变电所变压器的选择………………………………………………………………...12

4.2  主接线方案的选择…………………………………………………………………….13
 5.短路电流的计算………………………………………………………………………......15

5.1   1#变电所的短路电流计算……………………………………………………….....15

5.2   其他变电所得短路电流计算………………………………………………………16
 6.变电所一次设备的选择校验……………………………………………………..……..19
 6.1高压侧一次设备的选择校验…………………………………………………………19
 6.2 低压侧一次设备的选择校验………………………………………………………...19
 6.3 高低压母线的选择…………………………………………………………………...20
7.变电所进出线的选择………………………………………………………........22   

7.1   高压进线的选择……………………………………………….…………...22   

7.2   高压出线的选择…………………………………………………………………….22
 7.3  互感器选择………………………………………………………………………......19
 8.继电保护………………………………………………………………………….24
     8.1 继电保护的装置……………………………………………………………………24
     8.2 变电所低压侧的保护装置…………………………………………………………..24
 9.变电所的防雷保护………………………………………………………………25

9.1 变电所的防雷保护…………………………………………………………………..25

9.2 变电所接地装置的设计…………………….………………...........25
 10.总结…………………………………………………………………………......27
 致谢…………………………………………………………………………………28

摘   要   随着人类社会的进步发展，电正在我们的日常生活中扮演着越来越重要的角色。因为电能有着清洁、传输方便等众多优点，所以在温室效应日益严重的今天更加凸显了电能的重要性。而怎样才能安全、可靠、经济、合理的运用电能引发了越来越多人的重视。本次设计中塑料制品厂采用什么供配电方式,既能满足生产需要,又能使供配电系统安全、可靠、经济合理地运行就是我们我们要解决的首要问题。而采用什么电力设备对本设计也有着很大影响。因此需要选择合适的电
力设备及对资料进行准确的计算。本次设计主要需要进行塑制厂总负荷分组计算、全厂负荷计算、短路电流计算、继电保护的计算、防雷接地设计以及用电设备设择。

关键词:  工厂供配电 负荷计算 设备选择

Abstract
 With the progressive development of human society, electricity in our daily lives are playing an increasingly important role. As a clean energy, transmission and many other advantages of convenience, so increasing the greenhouse effect today underscores the importance of energy. And how to safe, reliable, economic and rational use of electricity led to more and more people attention. The design of plastic products factory methods used for distribution, not only to meet production needs, but also enable the power supply system is safe, reliable, economic rationality is that we run our first problem to be solved. What electrical equipment used in this design also have a significant impact. Therefore need to choose the right electrical equipment and the calculation of accurate information. The need for the design of the main factory plastic packet calculation of total load, the entire plant load, short circuit current calculation, the calculation of relay protection, lightning protection and grounding design for optional electrical equipment.

Key Words: The factory for the electrical power distribution    Load Calculation Equipment selection