某高层教学楼建筑电气设计

电气工程论文编号:DQ051  论文字数:17266,页数:29 附任务书，开题报告，文献综述，外文翻译,CAD图

目    录
1 概述 1
1.1工程概述 1
1.2 高层民用建筑的特点 1
1.3 建筑电气设计的组成 1
2 前言 2
3 供配电系统设计 3
3.1 负荷分级及供电措施 4
3.1.1 负荷等级 4
3.1.2 各级负荷的供电措施 5
3.1.3 本高层教学楼的负荷分级与供电措施 6
3.2 本工程的负荷计算 7
3.2.1 负荷计算的方法 7
3.3 电气设备的选择 7
3.3.1低压断路器的选择 7
3.3.2 低压开关柜的选择 8
3.3.2 导线型号及截面的选择 9
4 照明系统设计 11
4.1 一般规定 11
4.1.1 照明光源选择的一般原则 11
4.1.2 照明灯具选择的一般原则 11
4.1.3 本设计的光源与灯具的选择 11
4.2照度计算 12
4.3 照明设计要求 12
4.3.1 一般照明设计 12
4.3.2 应急照明设计 13
5 火灾自动报警及消防联动控制系统 14
5.1 总则 14
5.2 火灾自动报警系统设计 14
5.2.1 火灾探测器的选择 14
5.2.2 火灾手动报警按钮的设置 15
5.2.3 火灾事故广播及消防电话的设置 15
5.3 消防控制室与消防联动控制 15
5.3.1 一般要求 16
5.3.2 消防控制室 16
5.3.3 导线选择与线路敷设 17
6 防雷与接地系统设计 18
6.1 建筑物的防雷措施 18
6.2 基础接地安全设计 19
6.3 本高层教学楼的防雷接地保护措施 19
7 弱电系统设计 20
7.1 有线电视系统 20
7.2 广播扩声系统 21
7.3 综合布线系统 22
7.4 弱电部分线缆敷设 22
8 广播音响系统概述 23
8.1 广播音响系统的类型与特点 24
8.2 广播音响系统的组成 24
9 结论 25
致    谢 26
参 考 文 献 27

摘要
 该论文主要阐述了某高层教学楼各系统电气设计的设计依据、原则和方法及设计选择的结论。在低压配电系统设计中，根据负荷等级，确定供电方式及系统方案。运用需要系数法进行负荷计算，并按照规定选择保护电器、电线电缆，达到安全用电和节约能源的目的。在照明的设计中，本着节能的原则，选择荧光灯为光源，通过照度计算，确定最佳光源数，为学生和老师们创造了一个良好的学习、工作环境。在消防系统的设计中，通过感烟、感温探测器，手动火灾报警按钮，消防栓按钮等消防电气设备的布置、安装的设计，实现了对各防火区域的防火监测，探测火灾的发生。并实现消防联动，当有火灾时，探测、监控和手控系统发出火灾信号，有各联动装置发出警报，进行防火隔离和启动自动灭火系统，在疏散人员的同时进行自动灭火，控制、消除火灾隐患，保障该楼内人员、财产的安全。在防雷接地设计中，根据国家规范，通过计算将本建筑物归为三类防雷，按照三类防雷建筑要求设计。弱电的设计只简单介绍了有线电视系统，广播扩声系统以及综合布线系统。下篇则针对广播扩声系统进行了深入研究，主要为教学楼内的多功能厅、会议室的广播扩声系统设计做了详细的设计方案。
 关键词：建筑电气  低压配电  消防报警  综合布线

Abstract
 This thesis mainly explains the electrical design basis ,principle, methods and  the conclusion of the design choice in each system in the design of certain teaching building. In my power distribution design, according to load rank, determination power supply way and system plan; Using needs the method of correlates to carry on the computation load, according to the stipulation choice protection electric appliance, the electric wire electric cable, achieved uses electricity safely and saves the energy goal. In the lighting system design, in line with the principle which conserves energy, chooses the fluorescent lamp is the photo source, through the degree of illumination computation, determined the best photo source number, has created one comfortably, the bright life, the leisure environment for the students and teachers . In the fire prevention system design, through the feeling smoke, the feeling warm detector, the manual fire reports to the police the button, fire prevention electrical equipment and so on hose saddle button arrangement, the installment design, has realized to each area of fire protection fire protection monitor, the survey fire occurrence. realization fire prevention linkage, when will have the fire, the survey, the monitoring and the hand-controller system will send out the fire signal, will have various system to send out the warning, will carry on the fire protection to isolate and to start the automatic fire fighting system, while will disperse personnel's to carry on the automatic fire fighting, the control, the elimination fire hidden danger, will safeguard in this building the personnel, the property safety. Earths in the anti-radar design, The building is the third category lightning through calculating  accord to the national standard in this design of the lightning and grounding, which will be designed by the requests of the third category lightning building . The part of the light current mainly including: CATV, Public Broadcasting System, and Premises Distribution System and so on. It is to research the broadcasting and sound system in the next chapter ,the main content is that a detailed design plan is completed for the multifunctional lobby of the teaching building; the broadcast and sound system of the meeting room.
 Keywords: building electrical  low-voltage distribution  fire-fighting and warning  Generic Cabling