Abstract：This article describes the vertical shaft hammer crusher working principle and essence broken, and the main parameters of the crusher design. The design of a single rotor, multi-row hammer, not reversible electric motor mounted under the hammer crusher vertical shaft, model LPX6 500. Vertical Shaft Crusher from the cover, chassis, vertical rotor, composed of the base and the transmission. Cover with top feeding port side (into the hopper), in the middle with the rotor bearing. Removable cabinet interior with a back plate, the center vertical row of symmetrical arrangement of the rotor to install a number of hammer blows, transmission by the asynchronous motor, motor base, tensioner and the transmission structure, with vertical rotor connected to the lower part of the base set a discharge port and hopper. Broken bodies inside crushing chamber single rotor multi-row hammer reversible, that is a single-rotor spindle, multi-row hammer fixed to the spindle through the connections, the hammerhead be staggered. And the use of reversible rotary hammer, so that can face big hammer crushing the resistance, the hammer head turn in the opposite direction, reducing the load bearing spindle to protect the spindle is not damaged. By lining the inside of the broken bolts on the fixed cylinder. Cylinder and broken bodies fixed on the bottom shelf.
