Abstract: This paper describes the car before the shade of the stamping die design. Includes part of the product design process analysis, mold design and manufacturing process to determine the main parts and so on. This part is complex, requires multiple procedures done, the basic processes include blanking, drawing, punching, bending, flanging and so on. Parts for this product, the design should be clear lines to determine the design, the idea of the mold structure. First, the product structure and size analysis, the use of AUTOCAD to draw part of the three views to determine the size; then determine the optimal process plan (Blanking, Drawing - bulging, punching - bulging, punching - trimming, Punching - Bending - piercing and flanging); and then make the necessary calculation and dimensioning techniques, the use of AUTOCAD to complete the first process - drawing composite blanking die assembly drawing, and draw the non-standard part; then the same with AUTOCAD completion of the second procedure - bulging punching compound die; of other processes were analyzed to determine the details of each process of work; the last to complete the design.Keywords: stamping die process design lampshade目录
前 言 3
1 绪论 4
1.1 我国冲压模具业发展现状 4
1.2 我国冲压模具制造技术发展趋势 4
2 汽车前灯罩成形工艺分析 7
2.1 分析制件的冲压工艺性 7
2.1.1 材料 7
2.1.2 结构分析 7
2.1.3 尺寸精度与表面粗糙度 7
2.2 确定冲压工艺方案 7
2.3 模具形式 8
2.4 毛坯展开计算 8
2.4.1 拉深部分 8
2.4.2 弯曲部分 9
2.4.3 其它部分 (直接由CAD得出) 9
3 落料拉深复合模设计 10
3.1 排样 10
3.2 确定冲压方向和冲压中心 10
3.2.1 确定冲压方向 10
3.2.2 确定压力中心 11
3.3 确定拉深次数 12
3.4 确定冲裁力和拉深力 13
3.4.1 冲裁力 13
3.4.2 压边力 13
3.4.3 拉深力的计算 13
3.5 选择压力机 14
3.6 选用标准模架 15
3.7 工作部分尺寸计算 15
3.7.1 拉深工作部分尺寸 15
3.7.2 落料工作刃口部分尺寸计算 16
3.8 模具总体设计 18
3.8.1 工作零件 18
3.8.2 其它主要零件 20
3.9 模具结构尺寸验算 24
4 胀形冲孔复合模设计 25
4.1 成形部分 25
4.2 变形力与冲裁力的计算 26
4.2.1 胀形变形力 26
4.2.2 冲裁力 27
4.3 确定压力中心 27
4.4 选择压力机 28
4.5 选用标准模架 29
4.6 工作部分刃口尺寸计算 29
4.6.1 对冲裁刃口尺寸进行计算 29
4.6.2 胀形刃口尺寸的说明及确定 29
4.7 模具结构设计 30
4.7.1 主要工作零件 30
4.7.2 其它零件设计 31
结 论 33
参考文献 34
致谢 35