洗衣机水管接口塑料模具的设计

模具论文编号:JX413  包括设计图,任务书,外文翻译,说明书字数:31547.页数:54

目录
1 绪论
1.1 塑料模具的发展………………………………………………………………………1
1.2 我国塑料模具的发展趋势………………………………………………………………1
2 塑料零件分析…………………………………………………………………………………2
2.1 塑料件的工艺性…………………………………………………………………………4
2.2 结构分析…………………………………………………………………………………5
2.3 材料的成型特性与工艺参数……………………………………………………………5
3型腔数量和布局………………………………………………………………………………7
3.1 型腔数量的确定…………………………………………………………………………7
3.2 型腔的布局………………………………………………………………………………7
4 注射机型号的选择…………………………………………………………………………7
4.1 注射量的计算…………………………………………………………………………9
4.2 塑件和流道凝料在分型面上的投影面积及所需锁模力的计算………………………9
4.3 选择注射机……………………………………………………………………………9
4.4 注射机有关参数的校核………………………………………………………………10
5 模具分型面的确定…………………………………………………………………………12
6 浇注系统形式和浇口的设计……………………………………………………………14
6.1 主流道的设计…………………………………………………………………………14
6.2 分流道的设计…………………………………………………………………………16
6.2.4 分流道与浇口的连接……………………………………………………………18
6.3浇口的设计………………………………………………………………………………18
6.4冷料穴的设计 …………………………………………………………………………22
6.5 拉料杆的设计…………………………………………………………………………23
6.6合理选择充模流程………………………………………………………………………24
6.7浇注系统的平衡…………………………………………………………………………26
6.8 普通浇注系统截面尺寸的计算与校核………………………………………………26
7 排气系统的设计……………………………………………………………………………28
8 模架及其一些标准件和零件的选择……………………………………………………29
9 导向机构脱模机构的设计………………………………………………………………31
9.1 导柱导向机构…………………………………………………………………………31
9.2脱模机构的设计…………………………………………………………………………34
9.3 复位杆…………………………………………………………………………………36
10 侧向分型与抽芯机构的设计…………………………………………………………38
10.1 侧向分型与抽芯机构的分类…………………………………………………………38
10.2 抽芯力的计算…………………………………………………………………………38
11 模具的温度调节系统设计………………………………………………………………39
11.1冷却系统的设计………………………………………………………………………39
11.2 冷却时间的确定………………………………………………………………………39
11.3 冷却系统的分析………………………………………………………………………40
12 成型零件的设计与加工工艺……………………………………………………………43
12.1模仁部分的结构设计…………………………………………………………………43
12.2 螺纹侧抽芯的结构设计………………………………………………………………44
12.3成型零件工作尺寸的计………………………………………………………………44
12.4 型腔壁厚和底板厚度的计算…………………………………………………………46
13 模具材料的选用…………………………………………………………………………47
13.1 模具材料选用原则……………………………………………………………………47
13.2 注塑模具常用材料……………………………………………………………………47
13.3 塑料模具的选材………………………………………………………………………48
14 风扇模具开模及其工作过程…………………………………………………………50
15 设计体会…………………………………………………………………………………51
16 参考文献…………………………………………………………………………………52
17 致谢词……………………………………………………………………………………53

摘要：在现代工业中，模具工业已成为制造业的基础，这一观点随着全球制造业向我国转移的过程中以被越来越多的有识之士所意识到。而在模具行业中塑料模又是其重中之重，种模具占模具行业总份额的50％以上，我国的塑料成型模具设计，制作技术比较晚，整体水平还比较低。目前单型腔、简单型腔的模具达70%以上，仍占主导地位。本论文介绍了洗衣机水管接头的注射模设计过程。从型腔数量和布局的确定、注射机选择、浇注系统设计、模板及其标准件的选用、脱模及抽芯机构的设计、成型部件的设计等一一进行了详细的介绍。塑件有侧孔，需要设计侧向抽芯机构，增加了模具的复杂程度。
关键词：注射模;侧向抽芯;管接头

Design of Injection Mol forUnion of Washing machine
Mechanical Design & Manufacturing and Automation  Xu Peixun  instructor  Pan Junsong
Abstract：In the modern industry, the die industry has become the
foundation of the manufacturing industry, this standpoint was along with the process that worldmanufacturing industry transfer to our country, which was been aware of by the private who more and more know. But in die profession plastics mold was heavy its heavy inside again,this kind of molding tool accounts for 50% of total quota in profession in molding tool above. In our country,because of the late of manufacture beginning the totalitily standard of mold design was very low about the plastics of taking shape. Nowaday,The proportion of odd casement, simple casement mold was over 70percent which was still dominant. This paper introduces the main process of the injection mould designing of the union,recounts the detail asthesefollowed:deciding of the number and the arrangement of the cavity, the detrusion components ,core-pulling outfit,and the feed system; selection of the machine for injection,the moulding boards and the
standardized parts .The plastics has one side hole,so needs to design a core-pulling part from the side. As a result ,it adds the complexity of the mould.
Keywords : injection mould;core-pulling;union.