年产10万吨高强瓦楞原纸造纸车间网部和压榨部的工艺设计

轻化工程论文编号:QH016  论文字数:15128,页数:37  附CAD图

 
目录
中文摘要 I
英文摘要 II
目录 III
1 绪论 1
1.1  工程设计的背景 1
1.2  工程设计的必要性 1
1.3  需求预测与设计规模 2
2 工程设计条件与总平面布置 4
2.1  工程设计条件 4
2.1.1  原材料资源条件 4
2.1.2  燃料资源条件 4
2.1.3  动力资源条件 5
2.1.4  劳动力资源条件 7
2.2  总平面布置 7
3 生产工艺设计 11
3.1  全厂生产车间组成 11
3.2  车间生产综合叙述 11
4 车间公用工程 25
4.1  厂房建筑与结构 25
4.2  给水与排水 25
4.3  动力 27
4.4  自控与 仪表 28
4.5  环境保护与综合利用 28
4.6  劳动安全卫生 29
4.6.1  防护措施 29
4.6.2  安全防护 30
致谢 32
参 考 文 献 33

摘   要：本设计的题目为年生产10万吨高强瓦楞原纸造纸车间，重点为瓦楞原纸抄纸工段的网部和压榨部工艺设计。本设计以废纸浆制成的面浆为主要原料，配以旧瓦楞纸箱浆为底浆，来生产高强瓦楞原纸。造纸设备采用日产330吨的4000/500叠网多缸纸机。设计内容包括浆水平衡计算图绘制、设备选型及计算、车间设备布置图、工艺流程图。
关键词：抄纸工段; 网部; 压榨部; 瓦楞原纸
 
Technology Design of wire setion of paper machine for 100,000T/D prodution machine
 
ABSTRACT: It is a technology design of wire section and press section of high strength corrugating paper machine for production 100,000 tons per year . The key point is the Process Design about wire and press section of Corrugating Medium Paper Section. The design uses the waste paper pulp as the main raw material, with the plasma for the OCC at the end of plasma, giving contribute to produce the High-strength medium. The paper-making equipment meet the demand of the Nissan overlapping network of multi-cylinder paper machine 4000/500, which has the maximum productive capability of 330 tons per day. The process of design includes the process of  the balance between pulp and water , the selection and calculation of equipment, Workshop equipment layout and the chart of designing process.
Key words: Paper Section;  Net section;  Press section ;  corrugating medium