喷墨介质性能研究

印刷工程论文编号:YS022  论文字数:15007.页数:25

目  录
中文摘要 I
英文摘要 II
目  录 III
1  绪论 1
 1.1  引言 1
 1.2  喷墨打印的发展现状和优缺点 1
 1.3  研究的目的和意义 2
2  喷墨介质 3
 2.1  喷墨墨水介质 4
 2.2  喷墨打印纸 5
3  喷墨墨水性能与打印质量影响研究 8
4  喷墨打印介质性能测定 10
 4.1  实验条件 10
 4.2  喷墨打印介质性能测定 10
 4.3  喷墨打印介质与打印质量影响研究 14
5  总结 19
致谢 21
参考文献 22

摘要：本论文阐述了喷墨打印技术现状及发展趋势，分析了喷墨墨水和喷墨打印纸这两种喷墨介质，并逐步分析了喷墨墨水、喷墨打印纸介质的组成和特点。本论文以喷墨介质性能为基础，通过纸张适性实验，对喷墨打印介质与打印质量的关系进行研究。研究结果表明：性能优良的打印介质, 能完整地完成油墨转移, 使图文清晰、饱满地再现于纸张上, 从而获得令人满意的颜色再现效果。纸张的平滑度、光泽度、白度和不透明度不同，对打印质量的影响也不同。
关键词：喷墨打印；平滑度；白度；光泽度；不透明度。

Abstract: In this paper, ink-jet printing technology on the status quo and development trends, analysis of the ink-jet ink and ink-jet ink-jet printing paper of these two media, and progressive analysis of ink-jet ink, ink-jet printing the composition and characteristics of the previous. In this paper, a performance-based inkjet media, right through the paper experiments on the ink-jet printing and print media to study the relationship between the quality. The results show that: the performance of the fine print media, to the full completion of the transfer of ink to make clear facsimile, reproduced in full paper to obtain a satisfactory effect of color reproduction. Paper smoothness, gloss, whiteness and opacity different from the impact of print quality are also different.
Keywords: ink-jet printing; smoothness; whiteness; gloss; opacity.