Zigbee无线传感器网络的研究

电气自动化论文编号:ZD998    论文字数:17114,页数:41

目 录
摘要………………………………………………………………………………………………..I
1 绪论……………………………………………………………………………………………..1
1.1  无线传感器网络的研究现状……………………………………………………………2
1.2  课题的主要任务…………………………………………………………………………2
2 无线传感器网络概述………………………………………………………………………..3
 2.1  引言……………………………………………………………………………………...3
 2.2  无线传感器网络概述…………………………………………………………………...4
  2.2.1  无线传感器网络的特点………………………………………………………....4
  2.2.2  无线传感器网络的应用…………………………………………………………5
  2.2.3  无线传感器网络的系统结构……………………………………………………5
3  Zigbee协议……………………………………………………………………………….7
 3.1  Zigbee网络结构………………………………………………………………………...7
  3.1.1  Zigbee网络设备组成……………………………………………………………7
  3.1.2  Zigbee网络拓扑结构………………………………………………….7
        3.1.3  Zigbee网络协议栈框架…………………………………………………………8
    3.2  Zigbee协议栈介绍……………………………………………………………...10
4  硬件设计………………………………………………………………………17
 4.1  系统节点设计………………………………………………………………………17
 4.2  基于CC2430的RF卡结构及模块测试.................…………………17
5  软件设计………………………………………………………………………………...24
 5.1  点对点通信（Light-Switch）…………………………………………………………24
     5.1.1  点对点通信概述（P2P）………………………………………………………23
        5.1.2  发送信息与接收信息…………………………………………………………..23
 5.1.2.1  发送信息………………………………………………………………23
 5.1.2.2  接收信息………………………………………………………………24
 5.1.2.3  程序编译环境…………………………………………………………26
6  总结……………………………………………………………………………………….27
致谢………………………………………………………………………………………...27

摘  要
 ZigBee无线通信技术是一种新兴的短距离无线通信技术，具有低功耗、低速率、低时延等特性，具有强大的组网能力与超大的网络容量，可以广泛应用在消费电子品、家居与楼宇自动化、工业控制、医疗设备等领域。由于其独有的特性，ZigBee无线技术也是无线传感器网络的首选技术，具有广阔的发展前景。ZigBee协议标准采用开放系统接口(OSI)分层结构，其中物理层和媒体接入层由IEEE802.15.4工作小组制定，而网络层，安全层和应用框架层由zigBee联盟制定。
 本文首先介绍了ZigBee的发展前景与研究意义，并列举了一些ZigBee的应用例子与国内外对ZigBee的研究状况;接着根据IEEE802.15.4标准规范与ZigBee标准规范，简单扼要地阐述了ZigBee协议栈的物理层、媒体接入层、网络层、安全层和应用框架层等各层的功能以及各层间的接口。
 本文最后运用西安华凡科技有限公司的2.4GHz Zigbee SoC射频卡，进行点对点通讯实验（Light-Switch演示），以一个模块作为Switch，另一个模块作为Light，不停的按下Switch，Light就会交替闪烁，从而达到控制的效果。

关键词：CC2430 无线传感器网络 IEEE802.15.4协议 Zigbee

Abstract
 ZigBee wireless technology is a new short-distance wireless communications technology，    and it is a low-power low speed and low latency wireless standard. ZigBee has strong network capability and large network capacity and it can be widely used in consumer electronics，home and building automation， industrial controls ，medical sensor application and other fields. For its special feature，ZigBee is the best choice for wireless sensor network.ZigBee stack architecture is based on the standard Open Systems Interconnection(OSI) seven一layer mode.The IEEE802.15.4 standard defines the two lower layers: the physical (PHY) layer and the medium access control (MAC) sub-layer. The ZigBee Alliance builds on this foundation by providing the network (NWK) layer and the framework for the application layer.
 First of all，the paper introduces the development and research significance of ZigBee,also lists some application examples of ZigBee and describes the development status of ZigBee in China and other countries. Then,the paper describes the functions of all layers and the interface of each layer shortly according to IEEE802.15.4 standard and ZigBee specification.
 Finally，using the 2.4GHz Zigbee SoC RF card which is made by XI’AN HUAFAN Science and Technology company to do the point-to-point communication experiment(Light-Switch demonstration),using one module as the “Switch”,, and the other module as the “Light”, and press the “Switch” continually, the “Light” will be flashing alternately to achieve the control effect..
Keywords：CC2430，Wireless sensor network，IEEE802.15.4 Protoeols，ZigBee