机械论文编号:JX743  论文字数:10798.页数:36   附CAD图

目  录
中文摘要 i
英文摘要 ii
目录 iii
第一章     绪论 1-1
 1.1  分析珠玑的现状及发展前景 1
 1.2  机械行业的现状以及发展 1
 1.3  珠机系统的发展 2
 1.4  Solidworks的应用 2
第二章     上、下珠机机械系统设计 4-1
 2.1   上、下珠机机械系统的工作原理 4
 2.2  上、下珠机机械系统设计的整体设计 4
 2.3  上、下珠机机械系统各个系统的设计 5
 2.3  上、下珠机机械系统的优点 11
第三章     机器零件的绘制以及系统的装配 13-1
 3.1   Solidworks的介绍 13
 3.1   上铝排的设计 15
 3.2   压紧机的装配 16
第四章     上、下珠机机械系统设计的机械运行过程 19-1
 4.1   机械运行示意图 19
 4.2   上、下机珠机械系统设计的机械运动分解 19
 4.3   小结 23
第五章     机器的安装调试 24-1
 5.1  机器安装 24
 5.2  设备装配中出现的问题汇总 24
 5.3  故障分析 24
 5.4  上、下珠玑系统存在的问题及解决方案 26
 5.4  小结 27
第六章     总结 28
参考文献 31
致谢 32
图纸（另附）

摘     要
 本论文根据经济的发展，为满足人们对珠玑制品的需求，从而对机械设备进行研究，设计了上、下珠机机械系统。
 随着经济的快速发展，装饰品层出不穷，以珠帘为代表的水晶饰品又重新成为市场的宠儿。传统的手工珠玑制作，完全由工人独立完成，效率低下，耗费了许多人力，而且产量已经远远不能满足社会的需求，因而珠玑制作机械化已经迫在眉睫。而机械设备的设计已经从传统的二维走向了三维设计，本次研究采用SolidWorks进行对珠机系统的设计分析。
 珠机机械系统在现在市场上并不多见，本次设计的上、下珠机机械系统尚属首次。该系统机构简单，设计符合低成本生产的要求，促进生产效率的提高，为珠玑行业的发展添砖加瓦。该系统包含一些常用的机构，因此该系统将会被广泛应用于机械行业，为该珠机机械系统的发展奠定了基础。
 此外，该系统包含的优点很多，例如各个机构所完成的任务清晰明了，系统稳定性好，并且可以制作多种规格的珠玑，使该珠机系统适用于制作多种规格的珠机产品。
 该系统拥有简单高效的机构，同时拥有如此之多的优点，顺应了珠机系统发展的趋势，为今后的珠机系统行业提供一个充足的动力。
关键字：机械自动化 SolidWorks建模 珠机系统
 
 
   
The design of upper and lower bead mechanical system

Abstract
 Abstract: With the rapid economic development, endless accessories to jewelry crystal bead curtain represented again the darling of the market. Traditional hand-beading, completely independently by the workers, inefficient, consuming a lot of manpower, and production has been far from satisfying the needs of the community, so beading mechanization is imminent. The mechanical equipment has been designed from the traditional two-dimensional to three-dimensional design, this study conducted by SolidWorks Design and Analysis of the beading machine.
 Pearl mechanical system on the market is very rare today. This design, the mechanical system under the bead is the first time. The system organization is simple, that be designed to meet the requirements of low-cost production, and promoting production efficiency, for the development of the industry. The system contains a number of common institutions, so that the system will be widely used in machinery industry, and laid the foundation for the development of mechanical system .      In addition, the system contains many advantages, such as the tasks performed by various agencies clarity, system stability, and producing various specifications of Tamaki to make the Button Fastening Machine system is suitable for producing various specifications of the machine product.      The system has a simple and efficient institutions, and has so many advantages, beads machine system conforms to the trend for future trade beads machine system to provide a sufficient driving force.                              
Keywords: Machine automation system  SolidWorks modeling  Tamaki system